POLYSCELLANT · VAUDREUIL-SOULANGES

The asphalt driveway sealing guide

Everything you need to know: Black Mac, preparation, crack repair, drying and maintenance.

01 / BLACK MAC SEALER

Why we choose Black Mac

At PolyScellant, we use Black Mac for preventive asphalt driveway maintenance. Learn why we choose this sealer, what it can do for your pavement, and what to expect before the work begins.

An established Canadian manufacturer. A professional formulation.

We use Blackmac, a solvent-based bituminous sealer designed for preventive maintenance of asphalt surfaces.

  1. McAsphalt — The manufacturer

    Founded in 1970, McAsphalt has more than 50 years of experience in the bitumen industry. Its expertise spans many applications, from pavement maintenance to major road infrastructure. Several Canadian facilities have received Excellence in Manufacturing distinctions from the Asphalt Emulsion Manufacturers Association (AEMA). McAsphalt also has a facility in nearby Salaberry-de-Valleyfield.

  2. Blackmac — The product

    Helps limit aging — Helps reduce oxidation and moisture intrusion that contribute to asphalt deterioration.

    Surface care — Designed to treat minor surface porosity and hairline cracks; it does not replace major crack repairs.

    Natural black finish — Restores a more uniform black appearance to existing asphalt.

    Drying — Once adequately dry, the product forms a non-tacky finish; drying time depends on conditions.

  3. PolyScellant — The application

    A professional sealer alone is not enough. Surface preparation, weather conditions and application quality all affect the final result. We combine a documented professional product with careful application to help protect your investment.

    Read McAsphalt’s official product data sheet ↗

How does Blackmac help protect your asphalt?

In Québec, asphalt is exposed to water, sunlight, road salt and freeze-thaw cycles. Blackmac supports preventive maintenance by helping limit surface exposure to moisture and oxidation. However, no sealer can prevent every type of damage or replace necessary repairs to deteriorated pavement.

02 / Our process

How does PolyScellant work?

We prepare the surface before applying sealer. These are our usual steps, adjusted for each project.

01 — Inspection and measurement

We inspect the asphalt and measure the surface before confirming the work. A traditional measuring wheel is usually sufficient for a square or rectangular driveway. On a driveway with curves, several angles, islands or cut-outs, a simple length × width calculation may be less representative, so we use Moasure 2 to map the shape and surface area more accurately. We do not use it to make the quote more complicated, only when the driveway’s layout justifies it. The goal is to avoid underestimating or overestimating the area and to prepare a clear quote based on the actual dimensions.

  1. 01

    Assessment and confirmation

    Assess the driveway and confirm the work.

  2. 02

    Surface preparation

    Blow away leaves, sand and loose debris — always included.

  3. 03

    Additional cleaning

    Pressure wash only when necessary — optional and charged separately; allow the surface to dry fully.

  4. 04

    Crack treatment

    Clean and fill cracks BEFORE sealing, when included in the quote.

  5. 05

    Sealer application

    Apply Black Mac sealer when conditions are suitable.

  6. 06

    Aftercare instructions

    Explain drying and aftercare instructions.

03 / Before service

Prepare your driveway before our visit

A few simple steps make the work easier and help protect your belongings.

  1. Clear the driveway

    Move cars, trailers, bins, toys and other items off the driveway.

  2. Point out problem areas

    Tell us about stubborn stains, sinking areas or repairs you want assessed.

  3. Keep children and pets safe

    Keep children and pets away during work and curing.

  4. Leave the blowing to us

    No need to sweep loose leaves or sand: blower preparation is included.

  5. Pressure washing when needed

    Pressure washing is not automatically included; we recommend it only when helpful.

04 / After sealing

When can I walk or park?

Our team's aftercare instructions always take priority. These timelines are general guidelines and vary with weather and product.

0–24 hours

Keep off the driveway

Avoid traffic, objects and pets on the fresh coating.

24–48 hours

Foot traffic, when approved

Walking may be possible once sufficiently dry and with our approval.

48–72 hours

Vehicle access may resume

Parking may be possible depending on conditions; waiting around 72 hours is more conservative.

72+ hours

Normal use, with care

More normal use may resume if the coating is ready. Continue treating the relatively fresh surface gently.

For the first few weeks: avoid pressure washing, harsh degreasers and turning tires while stationary. These timelines are not guaranteed: temperature, humidity, sunlight and manufacturer instructions can change them. When in doubt, contact PolyScellant.

How long will the sealer stay shiny?

After application, Blackmac may remain shiny even when the driveway is dry enough to use according to our instructions. In our field experience, the finish generally becomes more matte around 21 days. Shade, temperature and weather can extend that period. A shiny finish does not necessarily mean the sealer is still wet.

05 / Maintenance

Care for your driveway season after season

Good maintenance does not mean sealing every year. The surface's actual condition should guide the decision.

  1. Clean regularly

    Remove debris regularly and clean spills with compatible products.

  2. Avoid stationary tire turns

    Avoid turning tires while stationary, especially soon after application.

  3. Monitor cracks and sinking

    Have major cracks and sinking areas assessed: sealer cannot replace structural repairs.

  4. Assess before resealing

    Inspect the pavement's condition before deciding when to reseal.

06 / WHEN TO RESEAL?

Does your driveway need a new coat of sealer?

You do not need to seal your driveway every year. The right time depends on the condition of the asphalt, weather exposure and how the driveway is used.

  1. Fading colour

    Your asphalt gradually loses its deep black finish and becomes grey. This may be a sign of surface aging.

  2. Visible surface wear

    Some areas become rougher or develop a more open texture. An assessment can determine whether preventive maintenance is appropriate.

  3. Cracks beginning to appear

    Small cracks deserve attention. Depending on their condition, repairs may be needed before sealing.

  4. Several years since the last treatment

    Time since the last application is one clue, but it does not determine by itself whether another coat is needed.

The right treatment, at the right time.

At PolyScellant, we recommend maintenance based on the actual condition of your driveway, not an automatic resealing schedule.

Wondering whether your driveway is ready for another coat?

Request a free quote. We can assess your project and recommend appropriate work.

Ready to care for your driveway?

Tell us about your driveway and get a quote tailored to your project.

Free quote ↗